XMGS100 by Sony - XM-GS100 Monaural Class D Amplifier

XM-GS100 Monaural Class D Amplifier

Sony XMGS100

Amp Design The XM-GS100's efficient Class-D mono block design, compact chassis size and single sided connections provide multiple mounting options while maximizing output and control for your audio system.

4 Ohm Power Output The XM-GS100 delivers 330 watts RMS power at 4 ohm with 14.4 volts, from 20 Hz - 200 Hz with less than 1% THD+N. This unit has a maximum output power of 600 mono at 4 ohm.

2 Ohm Power Output The XM-G100 delivers 600 watts RMS power at 2 ohm with 14.4 volts, at 50 Hz with less than 1% THD+N. This unit has a mximum output power of 1100 watts mono at 2 ohm.

Built-in Crossovers The XM-GS100 has a removable top panel that conceals a variable 12 dB/oct LPF (Low-Pass filter) at 50-300Hz as well as a 12 dB/octave sub-sonic HPF (High-Pass filter), variable at 6-70Hz to maximize your systems potential. This amplifier also offers a variable 0-10 dB 40 Hz bass boost circuit to increase low frequency response.

Input Flexibilty As well as traditional RCA inputs, the XM-GS100 offers direct connections (High Level Input) to the speaker output of your car audio unit if it is not equipped with RCA line outputs. The auto sensing, high level input feature also allows the amplifier to be powered up without the need for remote power turn on connections.

Protection Circuitry The Active Thermal Control regulates the units operating temperature for stable, long-term playback at high volume levels. Dynamic Distortion Suppressor reduces distortion that occurs at higher playback levels for clear bass reproduction.

Warranty The XM-GS100 includes a 3 year warranty.

Features

330 W high power output
600 W (at 4 ohms), 1100 W x 1 (at 2 ohms)
Active Thermal Control for stable playback
Dynamic Distortion Suppressor for clear sound
Low pass filte

Size & Weight
Dimensions (W x H x D)	2.01 x 10.71 x 7.95 in
Weight	5.51 lb
Rated Output Power, RMS 20 - 20000 Hz
Max. Channel Configuration at 2 ohm (W) / THD (%)	600 W x 1/1.0% (50 Hz)
Max. Channel Configuration at 4 ohm (W) / THD (%)	330 W x 1 / 1.0% (20-200 Hz)
Maximum Output Power (1 kHz)
Max. Channel Power Configuration at 2 ohms	1100 W x 1
Max. Channel Power Configuration at 4 ohm	600 W x 1
General Features
Frequency Response	10-300 Hz
Signal to Noise Ratio	100 dB
Tolerance	+0.5/-3 dB
Total Harmonic Distortion at 1 kHz (%)	0.1% (50 Hz)
Details
Bass Boost: Frequency (0 - 10 dB)	40 Hz
Current drain (A) - rated output power at 4 ohm	30A
Gold Plated Connectors	YES
Line In: Input Sensitivity	0.3-6
Line Out	YES (Through)
Load Capability (ohm)	NO/YES
MOSFET	YES
Speaker Level Input	YES
Subsonic High Pass Filter	YES
CTA Power output	330 W x 1
CTA SN Ratio	65 dBA
Amplifier
Channel Configuration	Mono
Low Pass Filter	50-300 Hz
Low-Pass Filter Slope	12 dB/oct

Quick Specs

Appearance
Type: Amplifiers
Dimensions
Width: 10 3/4"
Height: 2 1/8"
Depth: 8"
Features
Energy Star Rated: No

Limited Warranty

Get Adobe Reader

* Documents require Adobe Reader.

Professional delivery and installation is available for every product we sell. We would be happy to coordinate delivery and installation for you.

Extended warranties are usually very inexpensive and can save you thousands in the future. It's simple and inexpensive to purchase extended warranties and one of the smartest ways to protect your investment.

Electronics can be large, heavy and expensive. You probably don't have the special tools or expertise needed to fix them in a crisis. If you can spare a few thousand dollars without batting an eyelash for new electronics should they break tomorrow, don't buy a warranty. But if you're like most of us, protect yourself by purchasing inexpensive extended warranties when you buy a new product and save yourself big money in the long run.